When you're setting up livestock feed equipment, one of the first decisions is whether you need to move feed or process it. These two 220V machines sit on opposite sides of that choice: the illuSiyame Auto Feeder conveys grain, flour, and pellets into hoppers, while the INTSUPERMAI Grass Cutting & Kneading Machine processes forage and root crops into storable feed. Here's how they stack up.
Quick Verdict
If your bottleneck is moving material from ground level into a hopper or filling machine, the illuSiyame auto feeder is built for that automated transfer, and its listed price is at the top of this comparison. If you need to cut and knead grass, straw, or root vegetables on the farm, the INTSUPERMAI 4-blade machine is the direct tool and has the lower listed price. The listed price spread between them is USD 744.83.
At a Glance
| Product | Listed Price | Price Bar | Best For |
|---|---|---|---|
| 220V Auto Feeder Grain Conveyor Feed Flour Particle Feeding Machine with Spring | USD 2,358.88 | Conveying powders, pellets, and granular material to hoppers | |
| 220V Farm Grass Cutting & Kneading Machine 4 Blade Feed Processing Equipment | USD 1,614.05 | Cutting and kneading forage, grains, and root crops |
Where Each Product Wins
The illuSiyame auto feeder wins when your workflow depends on consistent, automated feeding of dry materials. Its 750W single-phase motor suits lighter-duty conveying tasks in feed, food, or plastics processing lines.
The INTSUPERMAI grass cutting machine wins when you need to process raw crops on site. With a 2200W motor, four blades, and a feed hopper, it handles a wider variety of plant materials and delivers a 400-800kg/h throughput for prepared feed.
Product Notes
220V Auto Feeder Grain Conveyor Feed Flour Particle Feeding Machine with Spring
This illuSiyame machine uses an inclined helical spring conveyor to transfer dry powder, pellet pet food, and granular materials into hoppers or filling equipment. Its 750W single-phase motor and 220V operation make it a straightforward addition to a processing line. The listed price is USD 2,358.88. The main reason to choose it is to automate material feeding and keep product levels consistent. The limitation: it is not a feed processor, so it won't cut, knead, or grind forage; its job is purely conveying. That higher upfront cost may be hard to justify if your primary need is chopping feed rather than moving it.
220V Farm Grass Cutting & Kneading Machine 4 Blade Feed Processing Equipment
This INTSUPERMAI machine combines cutting and kneading with a 4-blade design, suitable for grass, corn, wheat, peanuts, beans, straw, potatoes, carrots, cassava, and other root crops. It's rated at 400-800kg/h, comes with a feed hopper and inlet, and includes an air switch and voltage display meter. Its 2200W motor makes it a heavier-duty choice than the conveyor feeder. At USD 1,614.05, it's the lower-priced of the two. Choose it when you need to turn raw crops into stored feed, especially alongside a feed granulator. The limitation: it doesn't convey material to a hopper, so you still need a separate transfer method if that's part of your workflow.
Final Choice by Use Case
Buy the illuSiyame Auto Feeder if you need a conveyor solution for powders and pellets and don't mind the higher listed price. Buy the INTSUPERMAI Grass Cutting & Kneading Machine if you're processing forage and root crops and want the lower listed price for making storable feed.
