Backhoe loader ownership usually forces a choice before you even open the toolbox: do you need a hard part or the knowledge to use it? This group of four listings covers both sides. You can buy a new hydraulic pump for a John Deere 110/110TLB, a new GP-Piston hydraulic pump for Caterpillar 416/428 models, a Case 530CK operator's manual, or a CAT 416 service repair manual on USB. The listed prices have a wide spread, with the Case manual at one end and the Caterpillar pump at the other, so the smart first move is matching the product to the exact job on your machine.
Quick take
If your machine is a John Deere 110 or 110TLB and you need a hydraulic pump, the John Deere-compatible pump is the direct fitment in this group. If you are working on a Caterpillar 416 or 428 and need a hydraulic pump, the GP-Piston pump is the high-priced but model-specific option. If you own a Case 530CK and want operator-level maintenance and controls guidance, the Peaceful Creek manual is the low-priced entry. If your project is a CAT 416 service job, the USB repair manual is the service-depth option.
Listed price comparison
| Listed item | Listed price | Price bar |
|---|---|---|
| Case 530Ck Backhoe Loader Operators Owners Manual Maintenance Controls | USD 18.97 | |
| Caterpillar CAT 416 Backhoe Loader Service Repair Manual in USB | USD 90.25 | |
| Hydraulic Pump Compatible With JOHN DEERE Backhoe Loader 110 110TLB LVA15347 | USD 303.75 | |
| GP-Piston Hydraulic Pump 9T-6857 9T6857 For Caterpillar Backhoe Loader 416 428 | USD 945.00 |
The four items are not interchangeable; the price ordering simply shows the manuals at the low end and the hydraulic pumps at the high end.
Decision matrix
| Buyer need | Product to match | Key differentiator |
|---|---|---|
| New hydraulic pump for John Deere 110/110TLB | Hydraulic Pump Compatible With JOHN DEERE Backhoe Loader 110 110TLB LVA15347 | New pump with LVA15347 fitment for John Deere 110/110TLB |
| New hydraulic pump for Caterpillar 416/428 | GP-Piston Hydraulic Pump 9T-6857 9T6857 For Caterpillar Backhoe Loader 416 428 | New piston pump with 9T-6857/CA9T6857/9T-6857 part numbers |
| Operator controls and maintenance manual for Case 530CK | Case 530Ck Backhoe Loader Operators Owners Manual Maintenance Controls | Like New operator-focused manual with 107 pages |
| Service repair procedures for CAT 416 | Caterpillar CAT 416 Backhoe Loader Service Repair Manual in USB | PDFs on USB covering service, specs, schematics, troubleshooting |
Product notes
Case 530Ck Backhoe Loader Operators Owners Manual Maintenance Controls
Start here if you need operator-facing documentation for a Case 530CK. Peaceful Creek lists the manual at USD 18.97 and describes it as Like New, with 107 pages and part number Form No. 9-1215. The title tells you where its strengths sit: maintenance controls and operator responsibilities. For someone who just acquired a 530CK and wants basic controls and upkeep guidance, that is a low-priced starting point. The limitation is scope: an operator/owner manual is not a service-level repair manual, so it will not provide the same depth as a full disassembly and troubleshooting guide.
Caterpillar CAT 416 Backhoe Loader Service Repair Manual in USB
The CAT 416 manual is listed at USD 90.25 and is described as loaded as PDFs on a USB flash drive rather than printed. What makes it valuable for a 416 owner is the range of repair content: general service information, disassembly and assembly, specifications, system operation, schematics, testing and adjusting, troubleshooting, and torque specifications. That is a much wider sweep than an operator manual. The limitation is format and coverage: the manual is described for the 416, while the GP-Piston pump in this group names both 416 and 428 models, and the content lives on a USB drive rather than in a printed book. Use it when the job goes beyond controls into actual service work.
Hydraulic Pump Compatible With JOHN DEERE Backhoe Loader 110 110TLB LVA15347
For a John Deere 110 or 110TLB backhoe loader, this new hydraulic pump from Tractorparts.Store is listed at USD 303.75 and carries the LVA15347 part number. If that number matches the old pump you are removing, you have a concrete fitment to compare. It is the only hydraulic pump in this selection that names a John Deere fitment, and its listed price sits between the two manuals and below the Caterpillar pump. The limitation is the fitment decision: it is a pump, not a manual, so the final check is confirming the LVA15347 number and the machine match before ordering.
GP-Piston Hydraulic Pump 9T-6857 9T6857 For Caterpillar Backhoe Loader 416 428
At the top of the price range sits this new GP-Piston hydraulic pump, listed at USD 945.00. The title and part-number set center on Caterpillar 416 and 428 backhoe loaders, and the description includes 416 Series II and 428 Series II machine serial ranges. If the 9T-6857, CA9T6857, or 9T-6857 numbers match your old part, this is the model-specific pump option in the group. The limitation is price and fitment risk: USD 945 is a major outlay, and the listing specifically tells you to confirm the part number and pictures match before ordering. It is a pump rather than a manual, so the service side of the job remains separate.
Final recommendation by use case
Choose the Case 530CK operator's manual when you need controls, maintenance, and operator-level documentation for that specific model. Choose the CAT 416 USB service manual when you are opening up a 416 for repairs instead of just reading the operator guide. Choose the John Deere LVA15347 pump when the part number matches a 110/110TLB and you need a new hydraulic pump. Choose the GP-Piston 9T-6857 pump when you are repairing a Caterpillar 416/428 and the old pump matches one of the listed part numbers. Match the item to the exact machine and part number, and the choice becomes straightforward.
