If you're shopping for rough terrain material handling equipment, the first fork in the road is usually this: repair the machine you already have, or buy the complete machine you need. These two options sit at opposite ends of that decision. One is a new control handle made for the JLG G5-18A telehandler. The other is a used diesel rough terrain forklift, the Sellick SD-120. The practical question is which one lines up with the work you have in front of you.
Quick Verdict
If the machine you already operate is a JLG G5-18A and its control handle is the problem, the G5-18A control handle is the targeted repair part. If you don't have that telehandler and you need a complete lift machine, the Sellick SD-120 is the one to consider-just be ready for a possible drivetrain repair.
At a Glance
| Product | Listed Price | Price Bar | Type / Condition | Best For |
|---|---|---|---|---|
| Control Handle For G5-18A model JLG telehandler rough terrain forklift 70020769 | USD 38.99 | New handle assembly for the JLG G5-18A | Replacing a worn or failed control handle on that model | |
| Sellick SD-120 12K Diesel Rough Terrain Forklift 6K Hrs - Make An Offer | USD 19,500.00 | Used diesel rough terrain forklift | Buying a complete rough terrain lift |
Where Each Product Wins
- Control Handle for JLG G5-18A: This is the clear choice when you own the G5-18A and need a new handle assembly. It is marked as new, carries the matching part reference, and is meant as a direct replacement component.
- Sellick SD-120: This is the clear choice when you need a complete rough terrain forklift. The product has a 12,000 lb capacity at 144 inches and a 9,300 lb capacity at full lift height, along with a full hydraulic feature set. The caveat is the drivetrain work that may be needed to return the machine to its original configuration.
Product Notes
Control Handle For G5-18A model JLG telehandler rough terrain forklift 70020769
This is a specific component for a specific machine. The control handle is identified as new, with an interchange part number of 70020769, and it's built for the G5-18A model JLG telehandler. If that's your machine and the handle is failing, this part is the direct scope of your repair. The product is described as plug-and-play, which is useful for a handle replacement. The catch is scope: this component only replaces the handle, so it won't address a broader control system problem, and if you don't own a G5-18A, the part simply doesn't apply to your fleet. This is the choice for a focused parts purchase, not a machinery purchase.
Sellick SD-120 12K Diesel Rough Terrain Forklift 6K Hrs - Make An Offer
This is the whole-machine route. The Sellick SD-120 is a used diesel rough terrain forklift with 6,000 hours, and its feature set includes pneumatic tires, a three-stage mast, hydraulic fork positioner, side shift, mast tilt, and long forks. That makes it a practical candidate for a jobsite that needs a full lift unit rather than a single part. The main thing to plan for is the drivetrain: the previous owner removed the driveshaft going to the rear axle, so the forklift is currently represented and sold as 2WD, and the reason for removal has not been diagnosed. You should assume repairs may be required to restore 4WD operation. If you can work with a 2WD machine or plan for that repair, the SD-120 is the meaningful purchase here.
Final Choice by Use Case
- You already run a JLG G5-18A telehandler and the handle is the failure point. Choose the G5-18A control handle. It's new and model-specific.
- You need a complete rough terrain forklift for a jobsite. Choose the Sellick SD-120. It gives you the machine, the diesel power, and the mast/hydraulic features-just account for the drivetrain repair.
- You don't have a G5-18A telehandler. The control handle won't solve your problem. The Sellick SD-120 is the only one of the two that stands alone as equipment.
