When you're choosing a fixed-leg pallet stacker, the decision usually comes down to how high a load has to go and how much power you want behind the lift. These four stackers split into three operating styles: fully electric, semi-electric, and manual hydraulic. They also span a wide listed-price range, from the manual units at the lower end to the full-electric APOLLOLIFT at the top.
Quick take
The APOLLOLIFT Semi-Electric Stacker is the tallest option in this comparison and also has the highest capacity. The APOLLOLIFT Electric Stacker gives you a fully powered walkie-stacker design with a built-in battery and charger. The HPDAVV manual stackers are close siblings, both powered by a manual hydraulic handle. Once you know how high your top rack level is, the choice between these three operating styles becomes clearer.
Listed price comparison
Here is the direct listed-price view.
| Stacker | Listed price | Price bar |
|---|---|---|
| APOLLOLIFT Electric Stacker | USD 5,470.00 | |
| APOLLOLIFT Semi-Electric Pallet Stacker | USD 3,310.00 | |
| HPDAVV Manual Hydraulic Pallet Stacker (2200 lbs Capacity) | USD 1,699.00 | |
| HPDAVV 2200 lbs Manual Hydraulic Pallet Stacker | USD 1,678.00 |
Decision matrix
This table focuses on the operational trade-offs, not the listed price.
| Consideration | Manual HPDAVV models | APOLLOLIFT Semi-Electric | APOLLOLIFT Electric |
|---|---|---|---|
| Power source | Manual hydraulic handle | Lead-acid battery for lift; operator moves the unit | GEL battery for electric stacker operation |
| Maximum listed lift | 63" | 118" | 98" |
| Load capacity | 2200 lb | 3300 lb | 2640 lb |
| Operating style | Manual lift and movement | Electric lift, manual travel | Full electric stacker operation |
Product notes
APOLLOLIFT Electric Stacker (2640 lb)
The fully electric APOLLOLIFT model uses a GEL 24V/105AH battery and a built-in 24V/10A charger. Its 98-inch lift and 120-inch extended mast height make it a candidate for higher rack positions, while the 87.3-inch aisle width gives you a planning number for narrower aisles. The fixed-leg fork spacing is designed for European pallets, so your pallet footprint still has to line up. This is the stacker to consider when you want powered operation and a charger already integrated into the unit.
HPDAVV 2200 lbs Manual Hydraulic Stacker
The HPDAVV manual stacker has a 35.43-inch fork length and an adjustable lifting and lowering speed, which gives the operator control over how fast the load moves. The manual hydraulic design means there is no battery to charge. The trade-off is pallet type: the fixed legs are designed for block pallets and are not applicable to stringer pallets. If your loads stay in the lower rack zone and your pallet fleet is block-style, the fork length gives you room to work with a range of pallet sizes.
HPDAVV Manual Hydraulic Stacker (2200 lbs Capacity)
This HPDAVV manual model is the sibling of the other HPDAVV manual stacker, and the fork width is the quickest way to tell them apart: 5.24 inches instead of 5 inches. It also has a taller overall height at 77.95 inches. That extra fork width can matter when you are handling bulkier loads or need a bit more clearance under the load. Because it is a manual hydraulic handle, the operator supplies the lifting effort and the workflow stays simple. Choose this version when the wider fork surface fits your loads better.
APOLLOLIFT Semi-Electric Pallet Stacker (3300 lb)
The semi-electric APOLLOLIFT gives you the tallest lift height in this comparison at 118 inches and the highest capacity at 3300 lb. A 12V/100AH lead-acid battery powers the lifting function while you move the unit manually. The battery takes 10-12 hours to charge, so continuous shifts may need to be planned around a full charge. The fixed-leg design places it in the same pallet-handling family as the manual stackers, but with more height and capacity behind the lift. It offers a practical halfway point between manual effort and full electric operation.
Final recommendation by use case
If you need the tallest lift and the highest load capacity, the APOLLOLIFT Semi-Electric Stacker is the direct fit. If full powered stacker operation is the priority, the APOLLOLIFT Electric Stacker combines powered operation with a built-in charger. If manual operation and no battery maintenance are more important, either HPDAVV manual stacker matches-choose the one with wider forks if your loads need a little more fork surface. Start with your highest rack level: any load beyond the manual stackers' reach points toward one of the APOLLOLIFT options.
