When you need to move pallets, crates, or heavy boxes between the floor and a low platform, a hand-crank material lift stacker is often a straightforward tool for the job. In the wider cranes hoists and aerial lifts category, these manual stackers are a practical, lower-cost way to handle the same kind of lifting without a powered mast. The four models here span a $144.28 spread, so the first decision is whether a 330 lb stacker is enough or whether you need the 450 lb capacity of the top-priced unit.
Quick Take
If 330 lbs covers your heaviest load, the three lower-priced stackers cost roughly $138 to $144 less than the 450 lb model and lift to the same practical height. All three lower-capacity units reach 40 inches; the Uimoso reaches 39.4 inches. For most workshops, those units deliver enough capacity for standard boxes and lightweight pallets, while the 450 lb model becomes necessary only when loads consistently exceed the lower limit.
Price Comparison
| Product | Listed Price | Price Bar | Core Specs |
|---|---|---|---|
| Adjustable Material Lift Stacker Hand-Crank Winch Lift Truck | $281.35 | 330 lbs, 40 in lift, fork distance 5.51-20.28 in | |
| Hand-Crank Winch Material Lift Pallet Truck | $275.61 | 330 lbs, 40 in lift, four-wheel steel frame | |
| 330 lbs Hand-Crank Winch Material Lift Pallet Truck | $275.61 | 330 lbs, 40 in lift, adjustable forks | |
| Uimoso Material Lift Winch Stacker | $419.89 | 450 lbs, 39.4 in lift, foldable frame |
Decision Matrix
| If you need... | Pick this model | Why |
|---|---|---|
| The lowest price for a 330 lb stacker | Hand-Crank Winch Material Lift Pallet Truck or 330 lbs Hand-Crank Winch Material Lift Pallet Truck | Both are at the bottom of the price range and share the same capacity and lift height |
| A published fork distance range before ordering | Adjustable Material Lift Stacker Hand-Crank Winch Lift Truck | It lists a 5.51-20.28 in fork distance range |
| Heavier 450 lb loads with foldable storage | Uimoso Material Lift Winch Stacker | Only 450 lb option, with a foldable frame and 39.4 in lift |
Product Notes
Adjustable Material Lift Stacker Hand-Crank Winch Lift Truck - 330 lbs
The mid-priced entry in this group spells out its fork geometry: the fork distance adjusts from 5.51 to 20.28 inches, each fork measures 2.76 by 18.19 inches, and the 9-inch large wheels help it roll over workshop thresholds. The lift height and 330 lb capacity match the other two lower-priced stackers. Assembly is required, and the overall size is 25.98 x 23.62 x 55.12 inches. If you need a stated fork range before purchase, this is one of two models here that provides it. Its limitation is the same capacity ceiling as the cheaper models, so it won't handle heavier loads.
Hand-Crank Winch Material Lift Pallet Truck - 330 lbs
At the bottom of the price range, this model pairs a four-wheel design with a steel body and a protective paint finish for corrosion resistance. It lifts to 40 inches and carries the same 330 lb load as the other two lower-priced models, putting it in the same practical class. The forks adapt to different load dimensions, so it suits varied pallet sizes. The main limitation is that maximum capacity; split heavier loads or step up to the 450 lb Uimoso model. If you rely on stated fork dimensions, the Adjustable Material Lift Stacker in this comparison provides those numbers.
330 lbs Hand-Crank Winch Material Lift Pallet Truck - 330 lbs
Priced with the cheapest models, this version includes the same specific fork measurements as the Adjustable stacker: a fork distance range of 5.51-20.28 inches and fork dimensions of 2.76 x 18.19 inches. Its capacity and lift height match the other two lower-priced units, and the overall size is 25.98 x 23.62 x 55.12 inches. Assembly is required. The limitation is the same capacity ceiling; for loads above that, the 450 lb Uimoso is the only option here. The package weight is around 92.8 lbs, so a second person helps during setup.
Uimoso Material Lift Winch Stacker - 450 lbs
The most expensive model is also the only 450 lb stacker here. It lifts to 39.4 inches and offers a fork width range of 7.3 to 19.9 inches. The frame folds, and the folded dimensions are 49.61 x 28.94 x 11.02 inches, making it easier to store or transport. Fork length is 21 inches and fork width is 3.15 inches. The trade-off is the price: it costs more than any 330 lb model in this group. If typical loads stay under 330 lbs, a less expensive stacker is likely all you need; if they don't, this is the only unit that can handle them.
Final Recommendation
For a typical workshop moving boxes and lightweight pallets, the Hand-Crank Winch Material Lift Pallet Truck at the low end of the price range covers the 330 lb / 40-inch spec that matters for most jobs. If you want a similar lower price with more fork dimensions, the 330 lbs Hand-Crank Winch Material Lift Pallet Truck is the one to choose. The Adjustable Material Lift Stacker Hand-Crank Winch Lift Truck delivers the same adjustable-fork information at a slightly higher price. When 450 lb capacity is non-negotiable, the Uimoso Material Lift Winch Stacker is the only model here that fits, and its foldable frame makes storage easier.
