Lifting heavy pallets, machine parts, or boxes to shelf height is one of the most repetitive tasks in a warehouse or workshop. A winch material lift stacker combines the functions of a pallet jack, lift table, and stacker into one rolling tool. But the four stackers here are not interchangeable: they range from hydraulic foot-pedal designs to hand-crank models, and from 330 lb to 450 lb capacities with lift heights between 36 and 40 inches. Which one makes sense depends on how heavy your loads are, how high they need to go, and whether you prefer a crank or a pedal.
If you are weighing options in the cranes, hoists, and aerial lifts category, these compact lift stackers handle the same job without the footprint of a full forklift. The quick take below points you to the right one, and the price comparison shows exactly where each listing sits.
Quick Take
At $195.77, the GARVEE Winch Material Lift Stacker is the lowest-priced entry. The other GARVEE listing is $237.00, the Hand-Crank model is $275.61, and the Uimoso is $419.89. If you are choosing between the two GARVEE entries, the lower-priced listing is a sensible first stop. If your budget is flexible, the Uimoso sits at the top of this price spread.
Listed Price Comparison
The table below shows the listed price and a visual bar for each stacker, relative to the highest-priced listing.
| Product | Listed Price | Price Bar |
|---|---|---|
| GARVEE Winch Material Lift Stacker (36 in, 450 lb) | $195.77 | |
| GARVEE Adjustable Winch Stacker (36 in, 450 lb) | $237.00 | |
| Hand-Crank Winch Material Lift Pallet Truck (40 in, 330 lb) | $275.61 | |
| Uimoso Material Lift Winch Stacker (39.4 in, 450 lb) | $419.89 |
Decision Matrix
Use this matrix to match each stacker to your lift height, capacity, and mechanism preferences.
| Product | Lift Height | Load Capacity | Mechanism | Notable Feature |
|---|---|---|---|---|
| GARVEE Winch Material Lift Stacker | 36 in | 450 lb | Hydraulic foot pedal | Dual chains and removable platform |
| GARVEE Adjustable Winch Stacker | 36 in | 450 lb | Hydraulic foot pedal | Swivel casters and adjustable fork |
| Uimoso Material Lift Winch Stacker | 39.4 in | 450 lb | Winch | Foldable frame and wide fork range |
| Hand-Crank Winch Material Lift Pallet Truck | 40 in | 330 lb | Hand crank | Tallest lift in the group |
Product Notes
GARVEE Adjustable Winch Stacker Hydraulic Lift
This hydraulic cart lifts up to 450 lb and reaches 36 inches, with a fork that adjusts in width from 5.5 to 18.5 inches. The steel platform is removable, so you can move open crates or awkward boxes that a bare fork might not hold securely. Swivel casters and large rear wheels help it turn in tight workshop aisles. The two GARVEE listings share the same lift height, capacity, and fork width, so the choice comes down to which listing you prefer. If you need a lift higher than 36 inches, this model won't get you there; the hand-crank and Uimoso models both go higher.
GARVEE Winch Material Lift Stacker Hydraulic Lift Table Cart
This hydraulic stacker lifts to 36 inches using dual heavy-duty chains, a foot pedal, and a pressure release valve. The fork is adjustable, and the removable steel platform turns it into a flatbed for cartons or bags. The two GARVEE listings share the same lift height, capacity, fork width, and platform, so this entry is the one to review if you want those specs in a single cart. The trade-off is the lift height: it gets you to standard workbench and lower rack levels, but it won't reach overhead storage. For taller loads, the Uimoso at 39.4 inches and the hand-crank model at 40 inches are the options.
Uimoso Material Lift Winch Stacker
The Uimoso bumps the lift height to 39.4 inches while keeping the 450 lb capacity. Its forks adjust across a width range of 7.3 to 19.9 inches, and the fork length is 21 inches, which gives you room to handle wider pallets. The listing also includes folded dimensions of 49.6 x 28.9 x 11.0 inches, so the unit can be collapsed into a relatively compact footprint when you are not moving loads. It uses a winch mechanism rather than a hydraulic foot pedal, so if you want hydraulic pedal operation, the GARVEE models are the ones to compare.
Hand-Crank Winch Material Lift Pallet Truck
This hand-crank stacker reaches 40 inches, the tallest lift height in the group, but its maximum load capacity is 330 lb. It is a straightforward manual option for anyone who prefers cranking to a foot pedal. That makes it a better fit for lighter equipment, boxes, and tooling loads rather than full 450 lb pallets. The four-wheel design is described with a protective paint process for corrosion and rust resistance, and the adjustable forks let you tailor the fork spacing to the load. If your loads regularly approach 450 lb, the GARVEE and Uimoso models give you more capacity headroom even though they do not match the 40-inch lift.
Final Recommendation by Use Case
For most warehouse and workshop jobs, the GARVEE Winch Material Lift Stacker is the smart starting point because it is the lowest-priced entry and it covers the standard lifting and moving tasks in this group. If you need more vertical reach, the Uimoso is the pick. If you want a hand-crank model, the Hand-Crank is the one. And if you are evaluating the second GARVEE title, the Adjustable Winch Stacker is the same package under a different listing.
